69HAU3 Hubbell Furnas Air Compressor Pressure Switch 30-40 PSI With Unloader

  

Hubbell brand formerly known as Furnas, air compressor pressure switch most commonly used for climate control applications. Model 69HAU3 comes pre set with a cut-in pressure of 30 psi and a cutout pressure of 40 psi. This switch has a heavy-duty metal housing, a larger diaphragm for more accurate pressure reading at the lower psi settings of the switch, and an unloader valve on the side to unload pressure once the switch shuts off.

Note: If you don't need the unloader it does not need to be hooked up and it will not affect the functionality of the switch. YOUR COMPRESSOR, COMPRESSOR PARTS, & ACCESSORY SUPERSTORE! Blow Guns & Tire Inflators. Throttle Cont Cables & Valves. 69HAU3 Hubbell Furnas Air Compressor Pressure Switch 30-40 PSI With Unloader.

Max cut out: 60 PSI. NOTE: 1/4 Female NPT Air Connection. Note: 1/4" measures about 1/2" in diameter.

Can be used in single or three phase. Max HP Ratings: On 120 Volt single phase- 2 hp.

Max HP Ratings: On 240 volt single phase-3 hp. Max HP Ratings: On three phase 240 volt-5 hp. Max HP Ratings: On three phase 480/600 volt- 5 hp. Note: If used in conjunction with a magnetic starter this switch can be used on larger compressors because amperage is not an issue at that point. California Residents Warning: This product contains or may contain chemicals including lead known in the state of California to cause cancer, birth defects, or other reproductive harm.

California law requires this warning be given to all customers in the state of California. California Health and Safety Code 25249.5 et seq. If for any reason there is an issue with your order we will contact you right away.

Feedback At Compressor Source we strive for great customer service and to sell the best quality parts at the lowest prices possible.