Heavy Duty 12V 140 PSI Air Compressor Motor & Tank Kit for Train Horn & Off Road

  
12V Air Compressor Motor & Tank Kit - Heavy Duty "Competition Series". High volume reciprocating 2.0 CFM compressor with 1.5 gallon tank permits extended air horn operation. Powerful motor fills the aux tank from empty to full in just 2 minutes. Pre-installed top mount pressure gauge and auto on/off sensor to ensure the tank is always full and ready. Drain valve with T-handle located directly under the tank for easy maintenance.

Coiled nylon air hose included with fittings. 150 psi for air horns, general on-board air applications & off-road use. Compressor & tank can be stacked together, or mounted separately to accommodate different mounting locations.

For safety, air tank pre-assembled with 150 psi electric safety switch and 180 psi pressure relief valve. Recommended 25% duty cycle to avoid damage to compressor. Most Questions can be Answered by &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;Reviewing All Photos and Reading Entire Description.

&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B. If it is not shown in the photos, then it is not included.

(Applies to&#######xA0;US Orders Only). We will do our best to work with you to solve any issues. OTHER TERMS &#######xA0; &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B.

We recommend professional installation on all items. We are not responsible for installation of the products or any issues that result. We are unable to cancel orders once the order is placed. Per California Law (Prop 65) we are required to put the following warning on all our listings. Our showroom is located&#######xA0;in Lee's Summit, MO.

12V Air Compressor Motor & Tank Kit - Heavy Duty "Competition Series" -High volume reciprocating 2.0 CFM compressor with 1.5 gallon tank permits extended air horn operation. Powerful motor fills the aux tank from empty to full in just 2 minutes. Pre-installed top mount pressure gauge and auto on/off sensor to ensure the tank is always full and ready. Drain valve with T-handle located directly under the tank for easy maintenance.

Coiled nylon air hose included with fittings. 150 psi for air horns, general on-board air applications & off-road use. Compressor & tank can be stacked together, or mounted separately to accommodate different mounting locations.

For safety, air tank pre-assembled with 150 psi electric safety switch and 180 psi pressure relief valve.